Bloomington, IL
What we run into on Bloomington floors
Bloomington has more architectural range than most Central Illinois cities, and it changes what we quote block to block. Dimmitt's Grove and Founders' Grove are full of Victorians, foursquares and early-1900s homes with detached carriage-style garages sitting on old, thin, much-repaired concrete. The east side and the streets around Miller Park run to 1950s through 70s ranches with attached two-car garages — sound slabs, but usually with settlement cracking and a spalled apron. Then Fox Creek, Eagle Crest, Tipton Trails and the Grove at Kickapoo Creek are modern subdivisions with big attached three-car garages on clean concrete that needs little more than a grind. Commercially, Bloomington keeps a lot of office, service and back-of-house square footage in play thanks to the insurance and corporate employers here, and those floors almost always need to be coated in phases and outside business hours — which is how we prefer to run them anyway.
Garages
Garage Floor Coating in Bloomington, IL
Garage floor coating in Bloomington divides cleanly into those same two jobs. In the established neighborhoods the slab is mid-century: sound underneath, but with hairline cracking, some pitting, and spalling along the apron where the salt collects, all of which gets chased, filled and patched before anything else happens. In the newer subdivisions the concrete is generally clean and flat, so the work is a straight diamond grind and the budget goes into the finish instead. Either way you get a system rated for hot-tire pickup, because a coating that lifts where the car parks is not a floor, it is a callback — and driving back up I-74 to redo somebody's garage is not a business model.
Epoxy floor quote in Bloomington?
(217) 417-5950Call and tell us the room. We cover McLean County with no trip charge, and we can usually say on the phone roughly what your slab will need.
Prefer to type it out? Send the quote form instead or email dpflooringservicesllc@gmail.com.
Service area
Where Bloomington sits in our range
Fifty minutes up I-74, past Downs and Le Roy. We treat McLean County as a home market: same pricing, same scheduling, no trip charge.
We are based in Champaign County and work 50+ miles in every direction, so Bloomington and the rest of McLean County are well inside it, along with Normal, Downs, Le Roy, Clinton.
Call (217) 417-5950 and we will tell you straight away when we can get out to look at it.
Map shows the Bloomington, IL area we cover.
Services
What we install in Bloomington
All six services are available across McLean County and the surrounding towns.
Nearby
Other towns we cover
- Epoxy Flooring in Champaign, IL
- Epoxy Flooring in Urbana, IL
- Epoxy Flooring in Savoy, IL
- Epoxy Flooring in Mahomet, IL
- Epoxy Flooring in Rantoul, IL
- Epoxy Flooring in Normal, IL
- Epoxy Flooring in Decatur, IL
- Epoxy Flooring in Danville, IL
- Epoxy Flooring in Monticello, IL
- Epoxy Flooring in Tuscola, IL
- Epoxy Flooring in Paxton, IL
- Epoxy Flooring in Clinton, IL
- Epoxy Flooring in Tolono, IL
Questions
Before you book a Bloomington quote
How long does epoxy take to cure?
Most floors are ready for light foot traffic about 12 to 24 hours after the final coat, furniture and light use at 24 to 72 hours, and vehicle traffic after roughly 5 to 7 days. Full chemical cure takes about a week.
Those windows move with temperature and humidity, so we give you the exact dates for your floor before we start. And we would much rather tell you to wait two extra days than watch tire marks press permanently into a coating that was still green.
How long does an epoxy floor last?
A properly prepped residential garage or basement floor commonly runs 10 to 20 years. Commercial and industrial floors under forklifts, steel wheels and constant traffic are usually in the 5 to 10 year range before they want a recoat — and a recoat is far cheaper than a new install, because the prep is already done.
The single biggest factor is not the epoxy. It is the surface prep underneath it. That is exactly why we grind every floor instead of acid-etching it and hoping for the best.
Can you put epoxy over an existing floor?
Over bare concrete — yes. That is the ideal surface, and we grind it first to open the pores so the coating can key into it.
Over an existing coating — it depends. If the old coating is sound and well bonded, we can abrade it and go over the top. If it is peeling, chipping, bubbling or flaking, it has to come off first — and we do that too.
Over tile, wood, vinyl or carpet — no. Epoxy needs concrete to bond to, so those have to be removed first. We will tell you which situation you are in at the estimate, before you have committed to anything.
How much does epoxy flooring cost?
Epoxy is priced by the square foot, and four things move the number:
- Square footage. Bigger floors cost less per foot — the setup is the same whether the room is 400 or 4,000 square feet.
- Slab condition. A clean, sound slab needs a grind. One with cracks, spalling, pits or an old failing coating needs repair work first.
- The system you pick. Solid color is the most economical, full flake sits in the middle, and metallic is the premium option.
- Extras. Non-slip aggregate, line striping, cove base and heavier build thicknesses all add to it.
We will not quote a floor we have not seen, because a number pulled over the phone helps nobody. Call (217) 417-5950 and we will come measure. The estimate is free, itemized and in writing, so you can see exactly what you are paying for.
Get a free Bloomington quote
On-site, itemized and in writing — with no trip charge anywhere in McLean County.