Paxton, IL
What we run into on Paxton floors
Paxton is a county seat in the middle of some of the most productive farmland in Illinois, and the floors follow from that. Grain operation shops, equipment sheds and ag service buildings make up most of the larger square footage we coat here, and those are almost always slabs that went in without a vapor barrier and have spent years taking dirt, chemical and steel-wheel traffic. They get moisture tested, degreased where needed, blasted or ground hard, and then a build heavy enough to survive equipment rather than cars. In town, the housing around the Ford County courthouse and Pells Park is mostly older — pre-war and mid-century homes with detached garages on original concrete that will need crack and apron repair. There is also a steady run of small commercial work along the US-45 corridor. Paxton is a small town, and we quote the single-bay jobs here the same way we quote the big ones.
Garages
Garage Floor Coating in Paxton, IL
Garage floor coating in Paxton is usually one of two things: an older detached garage in town that needs its concrete fixed before anything is coated, or a farm shop several times that size where the moisture reading decides the system. For the in-town garages we recommend flake — it is the most forgiving finish over repaired concrete and it adds grip for the winter. For a working shop, flake with a non-slip aggregate in the topcoat, because those floors get wet and get walked on in boots. Either way, there is no trip charge to come out and look at it.
Epoxy floor quote in Paxton?
(217) 417-5950Call and tell us the room. We cover Ford County with no trip charge, and we can usually say on the phone roughly what your slab will need.
Prefer to type it out? Send the quote form instead or email dpflooringservicesllc@gmail.com.
Service area
Where Paxton sits in our range
Thirty-five minutes north on I-57, past Rantoul and Gibson City. All of Ford County is inside the radius.
We are based in Champaign County and work 50+ miles in every direction, so Paxton and the rest of Ford County are well inside it, along with Rantoul, Gibson City, Champaign, Hoopeston.
Call (217) 417-5950 and we will tell you straight away when we can get out to look at it.
Map shows the Paxton, IL area we cover.
Services
What we install in Paxton
All six services are available across Ford County and the surrounding towns.
Nearby
Other towns we cover
- Epoxy Flooring in Champaign, IL
- Epoxy Flooring in Urbana, IL
- Epoxy Flooring in Savoy, IL
- Epoxy Flooring in Mahomet, IL
- Epoxy Flooring in Rantoul, IL
- Epoxy Flooring in Bloomington, IL
- Epoxy Flooring in Normal, IL
- Epoxy Flooring in Decatur, IL
- Epoxy Flooring in Danville, IL
- Epoxy Flooring in Monticello, IL
- Epoxy Flooring in Tuscola, IL
- Epoxy Flooring in Clinton, IL
- Epoxy Flooring in Tolono, IL
Questions
Before you book a Paxton quote
How long does epoxy take to cure?
Most floors are ready for light foot traffic about 12 to 24 hours after the final coat, furniture and light use at 24 to 72 hours, and vehicle traffic after roughly 5 to 7 days. Full chemical cure takes about a week.
Those windows move with temperature and humidity, so we give you the exact dates for your floor before we start. And we would much rather tell you to wait two extra days than watch tire marks press permanently into a coating that was still green.
How long does an epoxy floor last?
A properly prepped residential garage or basement floor commonly runs 10 to 20 years. Commercial and industrial floors under forklifts, steel wheels and constant traffic are usually in the 5 to 10 year range before they want a recoat — and a recoat is far cheaper than a new install, because the prep is already done.
The single biggest factor is not the epoxy. It is the surface prep underneath it. That is exactly why we grind every floor instead of acid-etching it and hoping for the best.
Can you put epoxy over an existing floor?
Over bare concrete — yes. That is the ideal surface, and we grind it first to open the pores so the coating can key into it.
Over an existing coating — it depends. If the old coating is sound and well bonded, we can abrade it and go over the top. If it is peeling, chipping, bubbling or flaking, it has to come off first — and we do that too.
Over tile, wood, vinyl or carpet — no. Epoxy needs concrete to bond to, so those have to be removed first. We will tell you which situation you are in at the estimate, before you have committed to anything.
How much does epoxy flooring cost?
Epoxy is priced by the square foot, and four things move the number:
- Square footage. Bigger floors cost less per foot — the setup is the same whether the room is 400 or 4,000 square feet.
- Slab condition. A clean, sound slab needs a grind. One with cracks, spalling, pits or an old failing coating needs repair work first.
- The system you pick. Solid color is the most economical, full flake sits in the middle, and metallic is the premium option.
- Extras. Non-slip aggregate, line striping, cove base and heavier build thicknesses all add to it.
We will not quote a floor we have not seen, because a number pulled over the phone helps nobody. Call (217) 417-5950 and we will come measure. The estimate is free, itemized and in writing, so you can see exactly what you are paying for.
Get a free Paxton quote
On-site, itemized and in writing — with no trip charge anywhere in Ford County.