Urbana, IL
What we run into on Urbana floors
Urbana has an older housing stock than most of Champaign County, and that shows up in the concrete. Around Leal, the Historic East Urbana blocks and the streets near downtown and Crystal Lake Park, you are mostly looking at pre-1940 homes with detached garages set back off the alley. Those slabs tend to be thinner than a modern pour, with hairline cracking through the middle, some settlement toward the door, and spalling along the apron. None of that rules out epoxy — it just means the repair stage is genuine work rather than a formality, and we say so in the quote instead of discovering it on the day. The 1950s and 60s ranches out toward Ambucs and Crystal Lake are a step up in slab quality, and Stone Creek on the southeast side is a different world again: newer construction, attached three-car garages, flat sound concrete. On the commercial side, the medical and office buildings around the Carle Foundation Hospital campus and the businesses around Lincoln Square and the Market at the Square district usually want low-odor products and an overnight turnaround, which we can schedule.
Garages
Garage Floor Coating in Urbana, IL
Most garage floor coating we do in Urbana is on a detached garage that has been standing for sixty or seventy years, and the honest answer is that those floors need more prep than a new build does. We chase and fill the cracks, patch the spalled apron by the door, grind the whole slab to open concrete and then coat it. Done that way an Urbana garage floor looks as good as anything in a new subdivision and lasts just as long. Skipped, the coating peels off the patched areas first and the whole thing looks worse than bare concrete did. Flake is the popular choice here for exactly that reason — it hides repaired areas far better than a solid color ever will.
Epoxy floor quote in Urbana?
(217) 417-5950Call and tell us the room. We cover Champaign County with no trip charge, and we can usually say on the phone roughly what your slab will need.
Prefer to type it out? Send the quote form instead or email dpflooringservicesllc@gmail.com.
Service area
Where Urbana sits in our range
Urbana sits right next to our base, so there is no trip charge, and we can usually get out to look at a floor within a few days of the call.
We are based in Champaign County and work 50+ miles in every direction, so Urbana and the rest of Champaign County are well inside it, along with Champaign, St. Joseph, Savoy, Rantoul.
Call (217) 417-5950 and we will tell you straight away when we can get out to look at it.
Map shows the Urbana, IL area we cover.
Services
What we install in Urbana
All six services are available across Champaign County and the surrounding towns.
Nearby
Other towns we cover
- Epoxy Flooring in Champaign, IL
- Epoxy Flooring in Savoy, IL
- Epoxy Flooring in Mahomet, IL
- Epoxy Flooring in Rantoul, IL
- Epoxy Flooring in Bloomington, IL
- Epoxy Flooring in Normal, IL
- Epoxy Flooring in Decatur, IL
- Epoxy Flooring in Danville, IL
- Epoxy Flooring in Monticello, IL
- Epoxy Flooring in Tuscola, IL
- Epoxy Flooring in Paxton, IL
- Epoxy Flooring in Clinton, IL
- Epoxy Flooring in Tolono, IL
Questions
Before you book a Urbana quote
How long does epoxy take to cure?
Most floors are ready for light foot traffic about 12 to 24 hours after the final coat, furniture and light use at 24 to 72 hours, and vehicle traffic after roughly 5 to 7 days. Full chemical cure takes about a week.
Those windows move with temperature and humidity, so we give you the exact dates for your floor before we start. And we would much rather tell you to wait two extra days than watch tire marks press permanently into a coating that was still green.
How long does an epoxy floor last?
A properly prepped residential garage or basement floor commonly runs 10 to 20 years. Commercial and industrial floors under forklifts, steel wheels and constant traffic are usually in the 5 to 10 year range before they want a recoat — and a recoat is far cheaper than a new install, because the prep is already done.
The single biggest factor is not the epoxy. It is the surface prep underneath it. That is exactly why we grind every floor instead of acid-etching it and hoping for the best.
Can you put epoxy over an existing floor?
Over bare concrete — yes. That is the ideal surface, and we grind it first to open the pores so the coating can key into it.
Over an existing coating — it depends. If the old coating is sound and well bonded, we can abrade it and go over the top. If it is peeling, chipping, bubbling or flaking, it has to come off first — and we do that too.
Over tile, wood, vinyl or carpet — no. Epoxy needs concrete to bond to, so those have to be removed first. We will tell you which situation you are in at the estimate, before you have committed to anything.
How much does epoxy flooring cost?
Epoxy is priced by the square foot, and four things move the number:
- Square footage. Bigger floors cost less per foot — the setup is the same whether the room is 400 or 4,000 square feet.
- Slab condition. A clean, sound slab needs a grind. One with cracks, spalling, pits or an old failing coating needs repair work first.
- The system you pick. Solid color is the most economical, full flake sits in the middle, and metallic is the premium option.
- Extras. Non-slip aggregate, line striping, cove base and heavier build thicknesses all add to it.
We will not quote a floor we have not seen, because a number pulled over the phone helps nobody. Call (217) 417-5950 and we will come measure. The estimate is free, itemized and in writing, so you can see exactly what you are paying for.
Get a free Urbana quote
On-site, itemized and in writing — with no trip charge anywhere in Champaign County.